132
To Order Tel: 01274 533233 . Fax: 01274 537663 . Email:
Vacuum Forming
Arctic Refrigerant
Spray
Non-flammable Arctic Spray chills to
-52
o
C, and evaporates, leaving no
residue. It is ideal for chilling thermal
nickel titanium wires, or for instant
cooling of Essix appliances, described
as ‘essential’ by Dr Jack Sheridan, the
originator of Essix appliances:
“Immediately spray the still hot plastic
with a compressed spray refrigerant for
a few seconds. This accelerates the final
set, producing a significant improvement in plastic adaptation.
The faster the plastic can be brought to room temperature, the better
the plastic-to-cast adaptation will be because, if it is allowed to
cool slowly, the plastic tends to distort ... this instant cooling reduces
the possibility of lingual lift-off (the gingivolingual edge of plastic
pulling away from the cast).”
O/No
235ml can
9001-004
Trim-Rite
®
Release Agent
Helps avoid broken models and plaster
residue on vacuum formed appliances
•
Spray the cast with Trim-Rite
®
Release Agent to ensure a clean
separation between the working cast
and the thermoformed plastic
•
Formulated not to turn plastic yellow!
•
Works with all thermoforming plastics
12 oz can
O/No
9001-21004
Block-Out Compound
A specially formulated, high heat resistant compound ideal for
blocking out undercuts.
Will not run or stick to models.
O/No
450g
9001-221
GelBlock H
Light-Cure Block out Gel
Create space for moving teeth with Essix Retainers or Aligners
•
Easily Visible Blue Gel
•
Short 20 second curing time
•
Ideal for use on plaster models
•
Create space for tooth movement
•
Block out undercuts
•
Create reservoirs for bleaching trays
•
Create Bite Planes
2 x 3ml syringes and 10 dispensing tips
O/No
9001-109
Triad
®
Gel Light Cure Material
Block out excessive undercuts on the cast, correct cast
discrepancies and create space in Essix
®
aligners for tooth
movement.
•
Also use to create bite planes and splints
O/No
4 x 22g tube Clear Pink
30004
4 x 22g tube Clear Colourless
30006
