Home Order Online Lingual Attachments Mini Mold Bonder Line Mini Mold<sup>TM</sup> Universal Bite Opening Kit
The universal bite opening kit creates various bite opening attachments in seconds!5MM, 3MM, CUSPID BITE RAMP BONDER * Etch and prime the tooth as you would for bonding brackets.* Insert the top into the handle and foil with Mini Mold Light Cure Resin.* With light pressure, place and hold the tip on the tooth while making sure the small tab on the bonder top is facing the gingival.* Cure with curing light (5 to 20 seconds depending on the light Intensity and material) and remove tip by slowly pulling straight back.* To ensure bite ramps are equal on both teeth, use a bracket gauge and mark the lingual of the upper centrals where you will place the top of the bonder tip.HABIT CONTROL* Etch and prime the tooth as you would for bonding brackets.* Insert the tip into the handle and fill with Mini Mold Light Cure Resin.* With light pressure, place and hold the tip on the lingual of the first tooth requiring the spike.* Cure with curing light (5 to 20 seconds depending on the light intensity and material) and remove tip by slowly pulling straight back.* Refill the tip and follow same procedure for each tooth requiring a habit controlled spike.BRACKET BONDER* Etch and prime the tooth as you would for bonding brackets.* Insert the tip into the handle and fill with Mini Mold Light Cure Resin.* It may be necessary to use a small composite tool to push the paste into the undercut areas of the tip.* With light pressure, place the tip on the tooth where a bracket is needed. Bracket slot runs perpendicular to the alignment rib.* Cure with curing light (5 to 20 seconds depending on the light intensity and material) and slowly peel the tip off by tipping it sideways so as not to damage the bracket or tip.AutoclavableKit Contains:4 x Adult Cuspid Bite Ramps4 x Pedo Cuspid Bite Ramps4 x 3mm Bite Ramps4 x 5mm Bite Ramps4 x Molar Pads2 x Bonder Handles