Bonder Mini Mould Starter Kit

Product Description

Light-Cure your own resin attachments in seconds!
Make invisible aesthetic attachments in seconds!
Mini-Molds do the job quickly and easily. Just fill the mould (choose from 10 different treatment aids), place on tooth, and cure. In seconds, Mini-Mold tips precisely cast a light-cured resin appliance.

Autoclavable

Kit Contains:
3 x Habit Control
3 x Anterior Bite-Ramp 5mm
3 x Anterior Bite-Ramp 3mm
3 x Posterior Molar Pad
3 x Wire Bonder small
3 x Wire Bonder large
3 x Button Bonder
3 x Bracket Bonder
3 x Tube Bonder
2 x Bonder handle


5MM, 3MM, CUSPID BITE RAMP BONDER
* Etch and prime the tooth as you would for bonding brackets.
* Insert the top into the handle and foil with Mini Mold Light Cure Resin.
* With light pressure, place and hold the tip on the tooth while making sure the small tab on the bonder top is facing the gingival.
* Cure with curing light (5 to 20 seconds depending on the light Intensity and material) and remove tip by slowly pulling straight back.
* To ensure bite ramps are equal on both teeth, use a bracket gauge and mark the lingual of the upper centrals where you will place the top of the bonder tip.


HABIT CONTROL
* Etch and prime the tooth as you would for bonding brackets.
* Insert the tip into the handle and fill with Mini Mold Light Cure Resin.
* With light pressure, place and hold the tip on the lingual of the first tooth requiring the spike.
* Cure with curing light (5 to 20 seconds depending on the light intensity and material) and remove tip by slowly pulling straight back.
* Refill the tip and follow same procedure for each tooth requiring a habit controlled spike.


BRACKET BONDER
* Etch and prime the tooth as you would for bonding brackets.
* Insert the tip into the handle and fill with Mini Mold Light Cure Resin.
* It may be necessary to use a small composite tool to push the paste into the undercut areas of the tip.
* With light pressure, place the tip on the tooth where a bracket is needed. Bracket slot runs perpendicular to the alignment rib.
* Cure with curing light (5 to 20 seconds depending on the light intensity and material) and slowly peel the tip off by tipping it sideways so as not to damage the bracket or tip.